DoubleTake Adventure Mirror Kit - Long Arms and M10 x 1.5 Ball Bases (Pair)

DoubleTake Adventure Mirror Pair - with RAM Long Double Socket Arms and RAM M10 x 1.5 Ball Bases


* Indestructible - Made from reinforced Zytel
* Excellent visibility - SAE spec convex lens
* Easy to fold, remove, or swap between bikes
* Housing guaranteed against breakage
* RAM ball and Double Socket arm combination gives maximum adjust-ability
* Ball bases have M10 x 1.5 thread
* (2) long RAM arms included and (2) Male Thread Ball Bases included
* This is a pair so full set up for your bike - but check that the threads are identical on each side of the bike - otherwise you will need a reverse thread adaptor
* Made in the USA

This kit is designed to replace your factory mirrors. The ball base screws into the mirror post base on most bikes (see note below). Recommended for applications where mirror will be extended most of the time, although it still folds very well

Mirror Dimensions
Diameter = 100mm (4")
Length = 215mm (8.5")

Compatibility:
Threaded hole must contain the following dimensions for this base to fit: M10 x 1.5 pitch with a 14.5mm flange diameter with a 10.15mm thread length

Arm Dimensions:
Overall:
152 mm (6")
Socket-To-Socket:
134 mm (5.25")


Components:
DTM-A (2) DoubleTake Adventure Mirror
RAM-B-201U-C (2) DBL SOCKET ARM B BALL XL length
RAM-B-349-1U (2) BASE W/ M10 X 1.5 PITCH & 1" BALL

YouTube:
https://www.youtube.com/watch?v=C8mDODfi2_o&list=TLGGzK26BgaN84kwMjA5MjAyMQ
https://www.youtube.com/watch?v=9OdChYlKTWQ&list=TLGGqEM5kehrThcwMjA5MjAyMQ
https://www.youtube.com/watch?v=bGeOR-i5bOQ

Note: The right-hand mirrors on certain models of Yamaha, Beta, and certain KTM bikes may require a reverse thread adapter. Some models (WR250s) are factory equipped with a reverse thread adapter. Please verify if your specific bike is equipped with the reverse thread adapter on the right side before ordering.

Note: We stock reverse thread and other adaptors where required.

Note: Riders with BMW's (and others) that use an M8 x 1.25 thread might consider substituting the RAM-B-349U base with the RAM-B-367U - get in touch if you need to do this - either that or add the DTM-BMW adaptor base

Part: DTM-A-201-349-1-v.2