RAM Composite Yoke Clamp Mount for Trimble TDS Recon

RAP-B-121-TD1U RAM® Composite Yoke Clamp Mount for Trimble TDS Recon

Features:

* High strength composite cradle for Trimble TDS Recon
* Full access to all ports
* The clamp base will accommodate round rails or flat edge lips from 15.9mm to 31.8mm in diameter.
* High strength composite construction ensures product longevity
* Lifetime warranty




The RAM-HOL-TD1U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your mobile device and become the most useful accessory in your vehicle.

The RAM composite glareshield/yoke mount is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. The composite glareshield/yoke mount will fit a rail or edge lip from 15.9mm to 31.8mm. The mounting base can also accept a second ball (RAP-B-121BBU) giving you the ultimate double ball base. To mount the base, simply place the clamp ends around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes, golf buggies or unusual shaped motorbike rails.


Compatible Devices

Trimble
TDS Recon


Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Hardware Included
(4) #8-32 x 5/8" Machine Screws
(4) #8-32 Nylock Nuts

Hole Pattern
4-Hole AMPS:
1.181" x 1.496" (30mm x 38mm)


Arm Dimensions:
Overall:
94.7mm (3.73")
Socket-To-Socket:
76.2mm (3.0")

Materials
High strength composite

Weight
118 grams (0.26 lbs.)

Components:
RAM-HOL-TD1U Form-Fit Cradle for Trimble Recon
RAP-B-121BU UNIVERSAL CLAMP
RAP-B-202U 63mm DIA.BASE
RAP-B-201U DOUBLE SOCKET ARM