RAM Tab-Tite Cradle - 10" Tablets in cases including iPad 1-4 w/ Tough-Claw Base

RAP-404-TAB17U RAM® Tab-Tite™ Large Tablet Mount with Medium RAM® Tough-Claw™


Features

* Medium version of the RAM® Tough-Claw™ is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from 25-41mm in outer diameter; rubber pads provide stable gripping and protection of mounting surface
* Spring-loaded holder secures the iPad (1st, 2nd, 3rd, and 4th Gen) with case and more; interchangeable end cups allow you to modify the holder when upgrading devices
* Includes round ball base and medium length C size double socket arm; ball and socket technology allows for near-infinite adjustability
* Backed by a lifetime warranty



Ideal for commercial or pro-sumer applications where mounting the tablet to a round or flat surface is required but when removal without tools is desired. Just place the clamp over the rod/rail and tighten with the knob - no tools needed!

The base is a RAM Tough-Claw which is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw can be clamped on rails from 25 to 41mm outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM Tough-Claw will soon become another essential RAM component in your collection of mounting options.

Our customers tell us that this is an ideal mount for wheelchairs and mobility devices - easy to install and remove when needed.


The Tab-Tite™ cradle consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases.

The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications.

The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

Cradle Dimensions:
Height:
241mm to 298mm (9.5" to 11.75")
Width:
162mm to 210mm (6.375" to 8.25")
Depth:
3.3mm to 28mm (0.13" to 1.1")


Compatible Devices include:

Apple
iPad (1st Generation) with Case
iPad (3rd Generation) with Case
iPad (4th Generation) with Case
iPad 2 with Case

Dell
Venue 10 7000 with Case

Google
Nexus 10 with Case

HP
ElitePad 900 G1 with Case
Pro 610 with Case
Pro Slate 10.1 with Case

Lenovo
S6000 with Case
Yoga Tablet 2 (10 inch) with Case


Clamping Range
Rails/Tubes:
25.4 to 40.6mm (1" to 1.6")
Flat Surfaces:
0 to 40.6mm (0" to 1.6")


Arm Dimensions:
Overall Length:
143mm (5.625")
Socket-To-Socket Length:
114mm (4.5")


Ball/Socket Size
C Size (1.5")


YouTube:
https://www.youtube.com/watch?v=His8SUrc1eg
https://www.youtube.com/watch?v=rX36fAdknUY

Components:
RAM-HOL-TAB17U IPAD LIFEPROOF TAB-TITE CRADLE
RAM-202U 2.5" / 63mm DIA. BASE 1.5" Ball
RAP-404U Medium Tough-Claw with 1.5" Diameter Rubber Ball
RAM-201U Double Socket Arm for 1.5" Balls